Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The days of dim, power-hungry trailer lights are over with this 4-5/16" Miro-Flex LED light. It uses 12 red diodes behind a clear lens to deliver powerful, even illumination for your brake, tail, and turn signals. At 12.8V it draws only 0.208 amps for stop/turn and 0.013 amps for tail, so it’s energy-efficient while staying bright and visible from every angle. The LEDs are sealed for durability and backed by a lifetime warranty, meaning no more bulb swaps or filament failures over time.
If your trailer ever sees wet roads or boat ramps, this light won’t flinch. The polycarbonate lens and housing are completely sealed to keep moisture out, making it fully waterproof and submersible. That protection goes a long way toward preventing corrosion and short circuits, even after repeated dunking or heavy rain. You get the reliability you need in any weather or environment.
A built-in reflector keeps your trailer visible even when the lights are off. It’s integrated right into the lens—no extra parts or add-ons needed—and it enhances how the light spreads so you’re easier to spot from behind. The clear lens gives off a sharp, modern look while maintaining full DOT compliance.
Installing this light is straightforward thanks to its standard 3-prong PL-3 connector that works with common pigtail adapters like A45PB or A47PB (sold separately). It mounts flush using grommet A45GB or can be set up with an optional bracket BK45BB depending on your setup. With a compact 4-5/16" diameter and 2-3/8" thickness, it fits cleanly into most recessed spots and locks in securely once seated.
This round Optronics light brings together everything you want in a dependable trailer lamp—low power draw, long lifespan, waterproof construction, and easy plug-and-play wiring. It’s a solid solution whether you’re replacing old lights or upgrading for better efficiency and visibility. Once you mount it up, it’s built to keep performing season after season with no maintenance fuss.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
I haven't had a chance to put these lights in yet. -They're going in a jeep/buggy. I was impressed at how quickly they were shipped and how easy the website was to use. I love the look of these lights and can't wait to put them in.
Fast service great parts
Service and delivery were fantastic. Product was as described and simple to install. Thank you.
grest service
Works perfectly. Shipping was extremely fast.
Nice and bright. Easy retro fit on our T@B trailer.
We like these because they are brighter than most led lights
These lights are exactly what I was looking for. Going to use them for tail lights on a project car. Thank you.
good for jeep flush mount tail lights
Exact match to what I had, took about a minute to replace. It definitely is a bright light. Shipping was fast and fair priced.
I used a pair of these and their pigtails to upgrade the lighting on the back on my T@B camper trailer. Easy upgrade and they look great and are very bright.
Replacement lamps were exactly the OEM match. Good price and recieved shipment in about 4 days via ground shipping.
Excellent replacement light assembly! On-line photos showing the front and back of the assembly made verifying the connector plug easy. Clean, easy installation.
Richard Lewis, our T@B guru turned us on to the instructions for installing these on our 2004 T@B. What a fantastic difference! And etrailer.com was great to work with!
The Miro-Flex LED lights are just what I expected. I haven't installed them yet and when I do they will be installed on my Tab camping trailer. I look forward to higher visibility from the rear.
Delivery was extremely quick and well packaged.
I used these to replace the peterson taillights on my 1979 GMC dump truck. They were a direct replacement and fit perfectly. Was able to use the existing wiring and rubber boot for the direct install. Too easy! I've had comments from the people at the quarry and on the job that the visibility of my taillights was surprisingly bright even when they get a film of dirt on them. I had problems with the peterson lights burning out and so far, 3 months, these are still working perfectly.
These are some really bright lights. They have a very nice prism look to them, much different than most led lights you'll see on the road. Very happy with them. No grommets were included.
Very happy with taillights. Bright, with fairly good spread. Folks on the road seem to be more responsive to my 'requests' to change lanes now, than they were with my previous standard bulbs.
Received two of these LED lights and installed them on a 2008 Dutchman TAB teardrop trailer. We have always been concerned with the brightness of the OEM lights. These lights are a tremendous improvement and can be easily seen even in a sunny day. The etrailer website shows several pictures of these lights on a TAB.
WRT service, etrailer shipped items quickly and tracking was very easy. Thank you for the great service.
Great service and quality product. Due to the -20 plus temps we will be experiencing these next few days and winter itself, I won't be able to install these until spring but I am quite impressed with eTrailer. This solves a myriad of problems regular bulbs can have while improving the ability of others to see our running lights. Bravo. Thanks for the followup too. dB Minneapolis MN
Excellent product, good fit and finish, and worked well. Used them as tail/turn signal lights for my Jeep.
These lights are super bright as you might expect with 12 led's each. The quality of the materials is very good. I started out buying two of these and they looked so good I ordered two more and replaced the back up lights with the last two.
Did this improvement on my Tab trailer in under two hours.
Great lights
Excellent place etrailer good advise thanks Matthew
Charlos
The light replaced the tail light on my golf cart perfectly.
I installed these lights in a T@B teardrop camping trailer. The grommet would not work on this style trailer so I installed the lights using a silicone adhesive the same as the original Peterson lights. eTrailer delivered them in the same timely manner I have come to expect from them and the LEDs were easy to install. These lights are blindingly bright - simply amazing. I had rear lights with 1157 bulbs which I had upgraded to 2357 bulbs and equipped the tow vehicle with a powered converter but the light output was dim by today's standards. These lights are twice as bright on running lights and about 4 times brighter on the brake/turn signal elements. The thing we all fear when towing is being hit from behind by a driver that does not see our running, brake or turn signal lights in time. I know these lights will vastly improve the safety and visibility of our trailer. Thanks!
Richard L.
2/28/2014
These lights are great and you have sold a number of them to our friends now.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tunesmith
1/5/2015
Awesome. Fairly easy to replace the originals on our 2007 T@B and they work great. Much easier to see and they STAY LIT. Big plus. Used a Dremel type tool to open the access panel and they fit like a good leather glove. Highly recommend and thanks to Richard for recommending them to us.